Ghost++ Problem

[Mickaye]

Witam.

Mam problem z Ghost++. Mam wszystko ustawione dobrze. Bot hostuje gre normalnie. Wszyscy mogą dołączyć ale ja nie ;/. Hostuje i gram na 1 kompie. Podobno trzeba coś pokombinowac z microsoft loopback adapter ale nie wiem jak to ustawić. Gdyby mógłby mi ktoś pomóc to byłbym wdzięczny. Z góry thx za pomoc.


PS
Pozdro :p

[Mitsuki]

If you are trying to join a Ghost game hosted from your PC:
Set the ip of loopback adapter to your global ip and rename adapter's local connection to Loopback (go to whatismyip (http://whatismyip.com/) to find out if you don't know) and it should work.
Only drawback of this solution is:
If you have a dynamic IP, you have to manually change the ip each time your router reconnects.

How to add a loopback.
1) Go to Control Panel > Add Hardware.
For Windows XP Users:
http://img172.imageshack.us/img172/2277/25142908my8.jpg

For Windows Vista Users:
http://img136.imageshack.us/img136/5322/21770266mv3.jpg
http://img262.imageshack.us/img262/1971/39284513uq8.jpg
For Windows 7 Users: read this article (http://www.windowsreference.com/windows-7/how-to-install-a-loopback-adapter-in-windows-7/)

2) Click Next
3) Choose Yes, I have already connected the hardware
http://img169.imageshack.us/img169/3262/30132379ah9.jpg

4) Scroll down, and choose Add a new hardware device
http://img47.imageshack.us/img47/9089/23025452pz9.jpg

5) Choose Install the hardware that I manually select from a list
http://img172.imageshack.us/img172/4632/78733242pd1.jpg

6) Choose Network adapters
http://img182.imageshack.us/img182/5479/81690845oc7.jpg

7) Choose Microsoft from the list on the left. Then Choose Microsoft Loopback Adapter
http://img47.imageshack.us/img47/4237/31367493ez2.jpg

8) Click Next. You Have successfully installed the Loopback adapter.
9) Find the appropriate IP Address you need.


a) If you are trying to join a game created by your Ghost bot. Go to what is my ip (http://whatismyip.com/), and note down the IP Address.
b) If you are trying to join a game hosted by a PC on your LAN, find out the IP Address of the PC hosting the game

10) Go to the newly created Adapter and right click on it and choose Properties.
http://img399.imageshack.us/img399/4391/48024046ag8.jpg

11) Click on Internet Protocol (TCP/IP) and Click on Properties.
http://img399.imageshack.us/img399/1563/53002777ln2.jpg

12) Choose Use the following IP address, and fill the IP address you noted in step 9. Press TAB.
Note: If Subnet mask 255.0.0.0 didn't work, try using 255.255.255.0
http://img399.imageshack.us/img399/7340/10hg7.jpg

13) Click Ok twice.

Make sure to read the first post for additional information.
Windows Vista has very similar method to create a Loopback adapter.